这里列出了所有结构体和联合体的成员变量，并附带结构体或联合的详细说明:
- i -
- i2c_bus_control : rt_i2c_bus_device_ops
- i2c_pin_init_flag : rt_i2c_bit_ops
- ia_atime : dfs_attr
- ia_mtime : dfs_attr
- ia_valid : dfs_attr
- iaq : rt_sensor_data
- iConfiguration : uconfig_descriptor
- id : fb_fix_screeninfo, rt_can_filter_item, rt_can_msg, rt_mmcsd_host, rt_nvme_device, rt_pci_device, rt_platform_device, rt_reset_control, rt_scsi_device, rt_sdio_driver, uendpoint
- ide : rt_can_filter_item, rt_can_msg
- identify : rt_nvme_command
- idle : rt_cpu_usage_stats
- idle_thread : rt_cpu
- idProduct : udevice_descriptor
- ids : rt_ofw_stub, rt_pci_driver, rt_platform_driver
- idVendor : udevice_descriptor
- iFunction : uiad_descriptor
- iInterface : uinterface_descriptor
- iManufacturer : udevice_descriptor
- in_offset : rt_mailbox
- ind : rt_can_status_ind_type
- index : dfs_seq_file, rt_pci_msix_conf, rt_pci_msix_entry, uinstance
- info : rt_hwtimer_device, rt_sensor_device, rt_touch_device
- init : rt_audio_ops, rt_clk_ops, rt_device, rt_hwtimer_ops, rt_inputcapture_ops, rt_phye_ops, rt_pulse_encoder_ops, rt_rtc_ops, rt_watchdog_ops, uprotocal
- init_count : rt_phye
- init_priority : rt_sched_thread_priv
- init_tick : rt_cputimer, rt_sched_thread_priv, rt_timer
- inquiry : rt_scsi_cmd
- inst : upipe
- instruction : rt_qspi_message
- int_enabled : rt_ahci_port
- int_line : rt_pci_device
- int_pin : rt_pci_device
- intf : rt_sensor_config, uinstance
- intf_desc : ualtsetting, uhintf
- intf_list : ufunction
- intf_num : uinterface
- intf_type : rt_sensor_info
- intx : rt_pci_ep_header
- intx_pic : rt_pci_device
- invert : serial_configure
- io_cfg : rt_mmcsd_host
- io_queue_max : rt_nvme_controller
- io_queues : rt_nvme_controller
- ioctl : dfs_file_ops
- iomem_base : rt_syscon
- iomem_size : rt_syscon
- ioqid : rt_nvme_controller
- iProduct : udevice_descriptor
- irq : rt_ahci_host, rt_cpu_usage_stats, rt_pci_device, rt_pci_msi_desc, rt_pci_msix_entry, rt_pic_irq
- irq_ack : rt_pic_ops
- irq_alloc_msi : rt_pic_ops
- irq_compose_msi_msg : rt_pic_ops
- irq_disable : rt_pic_ops
- irq_enable : rt_pic_ops
- irq_eoi : rt_pic_ops
- irq_finit : rt_pic_ops
- irq_free_msi : rt_pic_ops
- irq_get_state : rt_pic_ops
- irq_handle : rt_sensor_device, rt_touch_device
- irq_handler : rt_sdio_function
- irq_init : rt_pic_ops
- irq_map : rt_pci_host_bridge, rt_pic_ops
- irq_mask : rt_pic_ops
- irq_nr : rt_pic
- irq_parse : rt_pic_ops
- irq_pin : rt_sensor_config
- irq_send_ipi : rt_pic_ops
- irq_set_affinity : rt_pic_ops
- irq_set_priority : rt_pic_ops
- irq_set_state : rt_pic_ops
- irq_set_triger_mode : rt_pic_ops
- irq_slot : rt_pci_host_bridge
- irq_start : rt_pic
- irq_unmask : rt_pic_ops
- irq_vector : rt_nvme_command_create_cq
- irq_write_msi_msg : rt_pic_ops
- irqs : rt_nvme_controller
- irqs_nr : rt_nvme_controller
- is_64bit : rt_pci_msi_conf
- is_array : rt_reset_control
- is_enabled : rt_clk_ops, rt_regulator_ops
- is_full : rt_serial_rx_fifo
- is_high : rt_inputcapture_data
- is_masking : rt_pci_msi_conf
- is_msix : rt_pci_msi_desc
- is_prepared : rt_clk_ops
- is_roothub : uhub
- iSerialNumber : udevice_descriptor
- isr : rt_pic_irq
- items : rt_can_bit_timing_config, rt_can_filter_config
1.13.1